|
Rh-7062 full-automatic plug and pull force test box
This machine is mainly used to detect various kinds of connector's insert force, pull out force, maintain force, breaking force and other series of parameters. Through computer data analysis, it can accurately detect the connector's load, stroke and corresponding change curve, life curve and so on. Through data report, the test data is summarized. Thus provides each kind of scientific data for the product quality inspection. Application field: automobile, electric wire, electronics, plastic products industry, etc.
I. function introduction
High precision servo electrode is powered by high precision ball screw. High precision and high stability force sensor are selected for force measurement. The control system is controlled by high speed microprocessor.
Ii. Equipment features
The equipment is provided with accurate control, high measurement accuracy, scientific test methods, small size, light weight, and the test speed of 1 ~ 200mm/min is available for selection. The sample clamping is convenient, the jig is easy to replace, the operation is simple, and equipped with special jig. The connector can be automatically centering during the test, and there will be no "eat single side" problem. The test data can be saved and read to provide a scientific method for the establishment of archives of test data.
Technical parameters
Detection maximum
|
500N
|
Precision grade
|
Level 1
|
A strength precision
|
±0.5%
|
Test speed range
|
1～500mm/min
|
Speed precision
|
±1%
|
The machine moves the maximum distance
|
80mm
|
Minimum distance between two fixtures
|
15mm
|
Overall dimensions
|
About
400mmx370mmx980mm
|
Servo motor power
|
AC 220V 400W
|
The power supply
|
AC 220V 50/60Hz
|
|
