Capacity: 100、200、500N、1K, Units: kgf, N, KN or, lbf or Kpa, Resolution: 1/10000, Load Accuracy: ±1%, Maximum Stroke without Clamps: 1000mm, Measure Speed: 0~600mm/min adjustable; test value, maximum value and rupture value can be displayed.
RH - 7010 microcomputer tensile testing machine
Product use
Microcomputer tensile testing machine are suitable for all kinds of metal, nonmetal and composite materials mechanics performance test, fully meet the requirements of relevant national standard. This machine is widely used in all kinds of metal, metal, rubber, plastics, footwear, leather, clothing, textile, insulation, wire, cable and other kinds of material, to test its properties such as tensile, tear, peel the test performance. Is a scientific research units, universities and colleges, technical supervision departments such as the ideal test equipment.
Conform to the standard
GB/T 2611-2007 tester general technical requirements;
GB/T 16491-1996 electronic universal testing machine;
JJG 475-2008 electronic universal testing machine metrological verification procedures;
GB/T 1040.1 2006 determination of tensile properties of plastics;
GB/T 8808-1988 soft composite plastic materials peel test methods;
GB13022-1991 plastic film tensile performance test methods;
GB/T 2790-180 degrees 1995 adhesive peel strength test method;
GB/T 2791-1995 adhesive T peel strength test method - flexible materials on flexible materials;
GB/T 2792-1998 pressure sensitive adhesive tapes 180 ° peel strength test method;
ASTM D903-1998 (2010) adhesive peel strength and peel strength test method;
CNS pressure sensitive adhesive tape and glue, 11888-2008 test method;
JIS K6854:1999 adhesive bonding components such as the determination of peel strength test standards at home and abroad.
|
Technical parameters:
|
Maximum tension
|
1000N
|
Pull the accuracy
|
±1%
|
Degree of decomposition
|
1/10000
|
The unit switch
|
Kg, lbf, N, KN, KPa
|
Total trip
|
800mm
|
Speed range
|
0-600mm/min
|
Speed regulation
|
The inverter control
|
The accuracy of speed
|
±1%
|
Accuracy of displacement
|
±1%
|
display
|
According to the test value, peak or fracture, units, etc
|
Transmission control mode
|
Frequency conversion motor
|
jig
|
In accordance with the requirements to choose
|
Protection device
|
Upper and lower protection
|
Stretching device
|
Scale + pointer, the whole displacement
|
The power supply
|
Single-phase 220V/50Hz/3A
|
volume
|
55×36×175cm
|
|
|