banner
首页 > 公司资讯 > 燃烧/阻燃/灼热丝/针焰测试 > ASTM D5207-2009 20 mm (50-W)和125mm(500-W)试验火焰的确认规程, ASTM D5025-2005小型燃烧试验用实验室燃烧器规格
 

ASTM D5207-2009 20 mm (50-W)和125mm(500-W)试验火焰的确认规程, ASTM D5025-2005小型燃烧试验用实验室燃烧器规格

标准号:ASTM D5207-2009  

中文名称: 塑料材料小型燃烧试验用20 mm (50-W)125mm(500-W)试验火焰的确认规程

英文名称:Standard Practice for Confirmation of 20mm (50W) and 125mm (500W) Test Flames for Small-Scale Burning Tests on Plastic Materials

被众多客户采购及认可的产品有:

RH-6033 UL电线燃烧试验箱http://www.cestr.com/cn/product/show.asp?id=179, http://www.cestr.com.cn/html/cn/pro/ranshaoshiyanji/20121213/5.html

RH-6033A UL94-2012垂直水平燃烧试验箱http://www.cestr.com/cn/product/show.asp?id=213,

http://www.cestr.com.cn/html/cn/pro/ranshaoshiyanji/20121213/4.html
RH-6032A单根电线垂直燃烧试验箱http://www.cestr.com/cn/product/show.asp?id=230
燃烧试验配件http://www.cestr.com/cn/product/index.asp?classid=31,

http://www.cestr.com.cn/html/cn/pro/ranshaoshiyanji/20130426/35.html

RH-4016换气式老化试验箱http://www.cestr.com/cn/product/show.asp?id=120

RH-7301端子截面分析仪 http://www.cestr.com/cn/product/show.asp?id=229, http://www.cestr.com.cn/html/cn/pro/guangxueyiqixilie/20121213/3.html

RH-1002E全自动绕线扎线机http://www.cestr.com/cn/product/show.asp?id=227,

http://www.cestr.com.cn/html/cn/pro/dianxianchatouzidonghuashebei/20130424/25.html

RH-1001全自动扎带扎线机(产品专利)

http://www.cestr.com/cn/product/show.asp?id=206,

http://www.cestr.com.cn/html/cn/pro/dianxianchatouzidonghuashebei/20130424/26.html

RH-1003A 自动贴标机(卷标机)

http://www.cestr.com/cn/product/show.asp?Id=209,

http://www.cestr.com.cn/html/cn/pro/dianxianchatouzidonghuashebei/20130424/24.html

RH-7301端子截面分析仪

http://www.cestr.com/cn/product/show.asp?id=229,

http://www.cestr.com.cn/html/cn/pro/guangxueyiqixilie/20121213/3.html

更多http://www.cestr.com/cn/product/index.asp, http://www.cestr.com.cn/html/cn/pro/


中标分类:
G32 ICS

分类:83.080

标准分类编号:AS

页数:4

发布日期:

实施日期:2009-09-01 作废日期:

被替代标准: 

代替标准:ASTM D5207-2003

引用标准:ASTM D3195; ASTM D5025; ASTM D883; ASTM E176; ASTM E230; ASTM E220; ASTM E608; IEC/TS 60695-11-4

采用标准: 

起草单位: 归口单位:

标引依据: 

补充修订: 

备注: 

范围:1.1 This practice covers the confirmation of test flames for small-scale burning tests on plastic materials using the laboratory burner described in Specification D 5025. Back pressures and flow rates for methane, propane, and butane supply gases are given for specific test flames. This practice describes a procedure to confirm the heat evolution of the test flame. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions. Note 1—There is no similar ISO standard. This practice is equivalent in technical content to, but not fully corresponding in presentation with, the confirmatory procedures of IEC/TS 60695-11-3, Method A and IEC/TS 60695-11-4, Method A. 1.

标准号:ASTM D5025-2005

中文名称: 在塑料材料上作小型燃烧试验用实验室燃烧器规格

英文名称:Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

中标分类:G32 ICS

分类:71.040.20

标准分类编号:AS

页数:3

发布日期:

实施日期:2005-04-01

作废日期:

被替代标准: 

代替标准:

引用标准:ASTM C509; ASTM D1600; ASTM D229; ASTM D3014; ASTM D3801; ASTM D5048; ASTM D5207; ASTM D4804; ASTM D4986; ASTM D635; ASTM D876; ASTM D883; ASTM E176; ISO 10093; IEC TS 60695-11-4 采用标准:

起草单位:

归口单位:

标引依据:

补充修订: 

备注: 

范围:1.1 This specification covers the physical dimensions and characteristics of a laboratory burner to be used as an ignition source for small-scale burning tests on plastic materials. The burner is used with methane, propane, or butane supply gases for flame heights of 20 to 125 minute 1—The burner described in this specification is suitable for use in the following ASTM standards: Specification C 509, Test Method D 229, Test Method D 635, Test Method D 876, Test Method D 3014, Test Method D 3801, Test Method D 4804, Test Method D 4986, and Test Method D 5048. Safety hazards and known limitations on applicability of fire-test-response standards are addressed in the individual test methods. Note 2—This specification is equivalent to the ignition source specified in IEC 60695-11-3, Annex A and IEC 60695-11-4, Annex A. Note 3—This specification is equivalent to the P/PF2 ignition source specified in ISO 10093.

    [ 上一页: UL758-2013燃烧性能测试试验,UL1581 第1090节,UL1581 第1061节,UL1581第1080节,UL1581第1060节,UL1581第1100节 ]
    [ 下一页: 德国莱尼集团/莱尼电气线缆(常州)有限公司选购我司RH-6033 UL电线电缆燃烧试验箱(UL Cable Flame Test Chamber,UL电线电缆燃烧试验机,VW-1/FT1/FT2电线电缆燃烧试验室,水平垂直燃烧试验箱,耐火燃烧试验仪, 耐燃烧试验机, UL1581/UL2556/UL758燃烧试验箱) ]
logo